*Note: Meets memorandum 1-A for original applications.
**Note: In order to use these camshafts in 1965-66 396/427ci blocks, it is necessary to machine a 3/16'' wide x 7/64'' deep groove in the rear main journal of the cam to allow oil flow to the top of the engine.
| Grind Number: | 3925535 T1.2 |
| Operating Range: | 4400-7000 RPM |
| Duration Advertised: | N/A Intake / N/A Exhaust |
| Duration @ .050'' Lift: | 264° Intake / 269° Exhaust |
| Valve Lift w/1.7 Rockers: | .560'' Intake / .580'' Exhaust |
| Lobe Separation Angle: | 112° |
| Max Lift Angle: | 108° ATDC Intake / 116° BTDC Exhaust |
| Open/Close @.050'' Cam Lift: | Intake - 24° BTDC (opens) / 60° ABDC (closes)
Exhaust - 70.5° BBDC (opens) / 18.5° ATDC (closes) |
VIEW CART
